To activate and save a section

1 Click K? Open on a Project-Specific Basis.

2 On the right-hand side under Derived from building structure open the Detached house - Sections folder, Section 1.

3 Open the shortcut menu of drawing file 1010 and select Source drawing files for section.

4 Click on the drawing files 2, 100, 101, 109, 110, 112, 116, 120 and 129 and click OK to close.

Select File

[öl

®s

\m

as

am

[HB

a

Building structure

- Tutoría

B □■

■jEt

Detached house

n

y

1 Grid

0-

-i

2 Clipping path

i i

L

3 Chimney

n

E

4

n

D

5

n

E

6

=

i i

h

7

n-

E

8

n

...IE!

5

□■■

...IE;

10

i i

ffiJ* 3'0und fleo'

E

• llll

Ground floor model

E

• 101

Ground floor caiport

1

• 1*1 102

r

• E 103

c

• E 104

1

• — 105

Ground floor carpor...

r

• E 106

r

• E 107

c

• E Kin

k

t- 109

Ground floor slab

Top fleo*

k

• fe- 110

Top floor model

r

■ E ri

-

nr

i

0 Used files

I

OK | [ Cancel

8 drawing filets) selectet

C:\Users\BSCHLU ~l\AppData\Loca Mem p

5 Open the shortcut menu of drawing file 1010 again and activate Layer setting, plot set (current),

6 In the Layer setting, plot set dialog box, select the Use plot set option and click the plot set Model.

13 Layer settin g, pi ot set

Elements from source drawing files © Use current layer setting © Include all layers (§) Use plot set

SC Entry

LS Design

SC Rooms

[ OK j [ Cancel

After re-opening the shortcut menu of drawing file 1010 you will see that the selected plot set has been entered: Layer setting, plot set (Model).

7 The next step involves section settings.

Open the shortcut menu of drawing file 1010 and select Section settings.

8 A dialog box opens. Make settings as shown below.

To represent curves in hidden line images as smooth surfaces instead of faceted, adjust the Max. merge angle to 5 degrees, for example.

Tip: Finish specifications you define using the m Room tool can also be displayed in sections. This way, you do not need to edit sections later.

9 In the Special settings area, click Archit... and set the options as shown in the figure below.

10 Click OK to close the dialog box.

11 After all settings for the sections have been made, open the shortcut menu of drawing file 1010 and select Generate section.

12 Select Section A and click OK to confirm.

^ Select clipping path / Enter section identifier:

Fi # Enter section identifier

2 E

| «

| Cancel ]

Drawing file 1010 automatically receives the following name: Section: A (result of hidden line calculation).

13 Uncheck the dialog box on the left-hand side next to Detached house under Building structure . This will hide all drawing files activated under Building structure.

14 Activate drawing file 1010 Section: A (result of hidden line calculation). Close the dialog box.

Section A-A

The result of the hidden line image is shown in drawing file 1010 Section: A (result of hidden line calculation).

Tip: If the drawing file looks 15 Repeat steps 3 to 14 for drawing file 1015 and Section B. empty, check that the view is set to @ Plan. If it is, the reason for this may be 2D data. In this case, click Show/Hide and enable the 2D elements in 3D views option.

Derived from building structure

■■■•■■■ Tutorial l±l I - 0.;: Views Detached house

El |_| Sections Detached house

i D Hi 1010 Section: A (Result hidden line calculation)

1012

1013

1014

11118 1013

1015 Section: B {Result of hidden line calculation)

The section view will not update automatically to reflect alterations you make to the floor plan.

If you have made alterations to a drawing file already in use as the source drawing file in the section calculation, you can update the section in plan using the Update calculation result tool (shortcut menu Section n).

For example, if you want to use another drawing file as the source drawing file in the section calculation, you must carry out the section calculation again as described above.

Note: Sections can also be created with the ; ; Activate Section tool (border of viewport). To assign the result to a separate drawing file, activate the 0 Hidden Line Image, Wireframe tool (Standard toolbar) and select Hidden line image.

In this case the section view will also not update automatically to reflect alterations you make to the floor plan. You need to calculate the section again and update the drawing file using 0 Hidden Line Image, Wireframe and Update Hidden Line Image.

0 0

Post a comment