Info

surface

Formwork qualities to Swiss standard SIA 118/262:2004

see also DIN 18217, 1981 ed., DIN 18331, 2002 ed., DIN 68791, 1979 ed

Fig. 24: Horizontal timber boards

Formwork made from 3 cm thick Douglas fir boards, straight edges, butt joints between boards.

Fig. 24: Horizontal timber boards

Formwork made from 3 cm thick Douglas fir boards, straight edges, butt joints between boards.

Fig. 27: Concrete with exposed aggregate finish

Aggregate revealed by jetting

Fig. 27: Concrete with exposed aggregate finish

Aggregate revealed by jetting

Fig. 25: Horizontal timber boards

Formwork made from 18 cm wide, 3 cm thick Douglas fir boards, chamfered edges, tight butt joints between boards. Characteristic, projecting concrete fins are the result.

Fig. 25: Horizontal timber boards

Formwork made from 18 cm wide, 3 cm thick Douglas fir boards, chamfered edges, tight butt joints between boards. Characteristic, projecting concrete fins are the result.

Fig. 28: Sandblasted surface

Aggregate revealed by blasting

Fig. 28: Sandblasted surface

Aggregate revealed by blasting

Was this article helpful?

0 0
Solar Power Sensation V2

Solar Power Sensation V2

This is a product all about solar power. Within this product you will get 24 videos, 5 guides, reviews and much more. This product is great for affiliate marketers who is trying to market products all about alternative energy.

Get My Free Ebook


Post a comment