Nofines concrete

No-fines concrete is manufactured from single sized aggregate (usually between 10 and 20 mm) and cement paste. Either dense or lightweight aggregates may be used, but care has to be taken in placing the mix to ensure that the aggregate remains coated with the cement paste. The material should not be vibrated. Drying shrinkage is low, as essentially the aggregate is stacked up within the formwork, leaving void spaces; these increase the thermal-insulation properties of the material in comparison with the equivalent dense concrete. The rough surface of the cured concrete forms an excellent key for rendering or plastering which is necessary to prevent rain, air or sound penetration. Dense aggregate no-fines concrete may be used for load-bearing applications.

0 0

Post a comment