Standards

BS 544: 1969 Linseed oil putty for use in wooden frames. BS 1203: 2001 Hot-setting phenolic and aminoplastic wood adhesives.

BS 2499 Hot-applied joint sealant systems for concrete pavements:

Part 2: 1992 Code of practice for application and use of joint sealants. Part 3: 1993 Methods of test. BS 3046: 1981 Specification for adhesives for hanging flexible wallcoverings.

BS 3712 Building and construction sealants:

Part 1: 1991 Method of test of homogeneity, relative density and penetration. Part 2: 1973 Methods of test for seepage, staining, shrinkage, shelf-life and paintability. Part 3: 1974 Methods of test for application life, skinning properties and tack-free time.

Part 4: 1991 Methods of test for adhesion in peel. BS 4071: 1966 Polyvinyl acetate (PVA) emulsion ad-hesives for wood.

BS 4254: 1983 Specification for two-part polysul-phide-based sealants.

BS 4255 Rubber used in preformed gaskets for weather exclusion from buildings:

Part 1: 1986 Specification for non-cellular gaskets. BS 4346 Joints and fittings for use with unplasticized PVC pressure pipes:

Part 3: 1982 Specification for solvent cement. BS 5212 Cold applied joint sealants for concrete pavements:

Part 1: 1990 Specification for joint sealants. Part 2: 1990 Code of practice for application and use of joint sealants. Part 3: 1990 Methods of test. BS 5270 Bonding agents for use with gypsum plaster and cement:

Part 1: 1989 Specification for polyvinyl acetate (PVAC) emulsion bonding agents for indoor use with gypsum building plasters. BS 5385 Wall and floor tiling:

Part 1: 1995 Code of practice for the design and installation of internal ceramic wall tiling and mosaics in normal conditions. Part 2: 1991 Code of practice for the design and installation of external ceramic wall tiling and mosaics (including terra cotta and faience tiles). Part 3: 1989 Code of practice for the design and installation of ceramic floor tiles and mosaics. Part 4: 1992 Code of practice for tiling and mosaics in specific conditions.

Part 5: 1994 Code of practice for the design and installation of terrazzo tile and slab, natural stone and composition block floorings. BS 5442 Adhesives for construction:

Part 1: 1989 Classification of adhesives for use with flooring materials.

Part 2: 1989 Classification of adhesives for use with interior wall and ceiling coverings (excluding decorative flexible material in roll form). BS 6093: 1993 Code of practice for design of joints and jointing in building construction. BS 6209: 1982 Specification for solvent-cement for non-pressure thermoplastics pipe systems. BS 6213: 2000 Selection of constructional sealants -guide.

BS 6446: 1997 Specification for manufacture of glued structural components of timber and wood-based panel products.

BS 6576: 1985 Code of practice for installation of chemical damp-proof courses. BS 8000 Workmanship on building sites:

Part 11: 1989 Code of practice for wall and floor tiling.

Part 12: 1989 Code of practice for decorative wall coverings and painting.

Part 16: 1997 Code of practice for sealing joints in buildings using sealants. BS 8203: 2001 Code of practice for installation of resilient floor coverings.

BS EN 204: 2001 Classification of thermoplastic wood adhesives for non-structural applications. BS EN 205: 1991 Test methods for wood adhesives for non-structural applications determination of tensile shear strength of lap joints. BS EN 301: 1992 Adhesives, phenolic and aminoplas-tic, for load-bearing timber structures: classification and performance requirements. BS EN 302 Adhesives for load-bearing timber structures: Part 1: 2004 Determination of bond strength in longitudinal shear.

Part 2: 2004 Determination of resistance to delam-ination.

Part 3: 2004 Determination of effect of acid damage to wood fibres.

Part 4: 2004 Determination of the effects of wood shrinkage on shear strength. Part 6: 2004 Determination of conventional pressing time.

Part 7: 2004 Determination of the conventional working life.

BS EN 1965: 2001 Structural adhesives - corrosion. BS EN ISO 9047:2003 Building construction - jointing products - determination of adhesion/cohesion properties of sealants at variable temperatures. BS EN ISO 9664: 1995 Adhesives - test methods for fatigue properties of structural adhesives in tensile shear.

BS EN ISO 11431: 2003 Building construction -jointing products - determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass. BS EN ISO 11600: 2003 Building construction -jointing products - classification and requirements for sealants.

BS EN 12004: 2001 Adhesives for tiles - definitions and specifications.

BS EN 12365 Building hardware - gaskets and weather stripping for doors, windows shutters and curtain walling:

Part 1: 2003 Performance requirements and classification.

Part 2: 2003 Linear compression force test methods.

Part 3: 2003 Deflection recovery test method. Part 4: 2003 Recovery after accelerated ageing test method.

BS EN 12436: 2002 Adhesives for load-bearing timber structures - casein adhesives.

BS EN 12765: 2001 Classification of thermosetting wood adhesives for non-structural applications. BS EN 12860: 2001 Gypsum based adhesives for gypsum blocks.

BS EN 13415: 2002 Adhesives - test of adhesives of floor coverings.

BS EN 14187-9: 2006 Cold applied joint sealants. BS EN 14188 Joint fillers and sealants:

Part 1: 2004 Specification for hot applied sealants. Part 2: 2004 Specification for cold applied sealants. Part 3: 2006 Specification for preformed joint sealants.

pr Part 4: 2006 Specifications for primers to be used with joint sealants. BS EN 14496: 2005 Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards.

pr EN 14815: 2003 Adhesives, phenolic and amino-plastic for finger-joints in lameliae for load-bearing timber structures.

pr EN 15416: 2005 Adhesives for load-bearing timber structures.

pr EN 15425: 2005 Adhesives, one component polyurethane, for load bearing timber structures. pr EN ISO 17087: 2003 Specification for adhesives used for finger joints.

BS EN 26927: 1991 Building construction - Jointing products - Sealants vocabulary. BS EN 27389: 1991 Building construction - Jointing products - Determination of elastic recovery. BS EN 27390: 1991 Building construction - Jointing products - Determination of resistance to flow. BS EN 28339: 1991 Building construction - Jointing products - Sealants - Determination of tensile properties.

BS EN 28340: 1991 Building construction - Jointing products - Sealants - Determination of tensile properties or maintained extension.

BS EN 28394: 1991 Building construction - Jointing products - Determination of extrudability of one-component sealants.

BS EN 29046: 1991 Building construction - Determination of adhesion/cohesion properties at constant temperature.

BS EN 29048: 1991 Building construction - Jointing products - Determination of extrudability of sealants under standardized apparatus.

0 0

Post a comment