Standards

BS 146: 2002 Specification for blastfurnace cements with strength properties outside the scope of BS EN 197-1.

BS 410 Test sieves:

Part 1: 2000 Test sieves of metal wire cloth. Part 2: 2000 test sieves of perforated metal. BS 812 Testing aggregates:

Parts 2, 100-6, 109-114, 117-21, 123-4. BS 915 Specification for high alumina cement:

Part 2: 1972 Metric units. BS 1370: 1979 Specification for low heat Portland cement.

BS 1881 Testing concrete:

Parts 5,112-13,119,121-2,124-5,127-8,131,201, 204, 207-9.

BS 3797: 1990 Lightweight aggregates for masonry units and structural concrete. BS 3892 Pulverised-fuel ash:

Part 1: 1997 Specification for pulverised-fuel ash for use with Portland cement. Part 2: 1996 Specification for pulverised-fuel ash to be used as a Type 1 addition. Part 3: 1997 Specification for pulverised-fuel ash for use in cementitious grouts. BS 4027: 1996 Specification for sulfate-resisting Portland cement.

BS 4248: 2004 Supersulfated cement.

BS 4449: 1997 Specification for carbon steel bars for the reinforcement of concrete.

BS 4483: 1998 Steel fabric for the reinforcement of concrete.

BS 4486: 1980 Specification for hot rolled and processed high tensile alloy steel bars for the pre-stressing of concrete. BS 4550 Methods of testing cement:

Parts 0, 3.1, 3.4, 3.8 and 6 BS 4551 Methods of testing mortars, screeds and plasters:

Part 1: 1998 Physical testing. Part 2: 1998 Chemical analysis and aggregate grading. BS 4887 Mortar admixtures:

Part 1: 1986 Specification for air-entraining (plasti-cising) admixtures.

Part 2: 1987 Specification for set-retarding admixtures.

BS 5224: 1995 Masonry cement. BS 5262: 1991 Code of practice for external renderings.

BS 5642 Sills and copings:

Part 1: 1978 Specification for window sills of precast concrete, cast stone, clayware, slate and natural stone.

Part 2: 1983 Specification for coping of precast concrete, cast stone, clayware, slate and natural stone. BS 5838 Specification for dry packaged cementitious mixes:

Part 1: 1980 Prepacked concrete mixes. BS 5896: 1980 Specification for high tensile steel wire and strand for the prestressing of concrete. BS 5977 Lintels:

Part 1: 1981 Method for assessment of load. BS 6073 Precast concrete masonry units:

Part 1: 1981 Specification for precast concrete masonry units.

Part 2: 1981 Method for specifying precast concrete masonry units. BS 6089:1981 Guide to assessment of concrete strength in existing structures.

BS 6100 Glossary of building and civil engineering terms:

Part 0: 2002 Introduction. Part 1: 2004 General terms. Part 10: Work with concrete and plaster. BS 6463 Quicklime, hydrated lime and natural calcium carbonate:

Part 101: 1996 Methods of preparing samples for testing.

Part 102: 2001 Methods for chemical analysis. Part 103: 1999 Methods for physical testing. BS 6610: 1996 Specification for pozzolanic pulverised-fuel ash cement.

BS 6699: 1992 Specification for ground granulated blastfurnace slag for use with Portland cement. BS 6744: 2001 Stainless steel bars for the reinforcement of and use in concrete.

BS 7542: 1992 Method of test for curing compounds for concrete.

BS 7979: 2001 Specification of limestone fines for use with Portland cement.

BS 8000 Workmanship on building sites:

Part 2: 1990 Code of practice for concrete work. Part 9:2003 Cementitious levelling screeds and wearing screeds.

Part 10: 1995 Code of practice for plastering and rendering. BS 8110 Structural use of concrete:

Part 1: 1997 Code of practice for design and construction.

Part 2: 1985 Code of practice for special circumstances.

Part 3: 1985 Design charts for singly reinforced beams, doubly reinforced beams and rectangular columns.

BS 8204 Screeds, bases and in-situ floorings:

Part 1: 2003 Concrete bases and cement sand levelling screeds to receive floorings. Part 2: 2003 Concrete wearing surfaces. Part 3: 2004 Polymer modified cementitious levelling screeds and wearing surfaces. Part 4:1993 Cementitious terrazzo wearing surfaces. Part 7: 2003 Pumpable self-smoothing screeds. BS 8297: 2000 Code of practice for design and installation of non-load-bearing precast concrete cladding.

BS 8443: 2005 Specification for establishing the suitability of special purpose concrete admixtures. BS 8500 Concrete. Complementary British Standard to BS EN 206-1:

Part 1: 2002 Method of specifying and guidance to the specifier.

Part 2: 2002 Specification for constituent materials and concrete.

Part 4 Requirements for standardised prescribed concretes. BS EN 196 Methods of testing cement: Part 1: 2005 Determination of strength. Part 2: 2005 Chemical analysis of cement. Part 3: 2005 Determination of setting time and soundness.

Part 5: 2005 Pozzolanicity test for pozzolanic cements.

Part 6: 1992 Determination of fineness. Part 7: 1992 Methods of taking and preparing samples of cement. BS EN 197 Cement:

Part 1: 2000 Composition specfications and conformity criteria for common cements. Part 2: 2000 Conformity evaluation. Part 4: 2004 Low early strength blastfurnace cements. BS EN 206 Concrete:

Part 1: 2000 Specification, performance, production and conformity. BS EN 413 Masonry cement:

Part 1: 2004 Composition, specifications and conformity criteria. Part 2: 2005 Test methods. BS EN 446: 1997 Grout for prestressing tendons -grouting procedures.

BS EN 447: 1997 Grout for prestressing tendons - specification for common grout.

BS EN 450 Fly ash for concrete:

Part 1: 2005 Definitions, specification and conformity criteria.

Part 2: 2005 Conformity evaluation. BS EN 451 Method of testing fly ash:

Part 1: 1995 Determination of free calcium oxide content.

Part 2:1995 Determination of fineness by wet sieving. BS EN 459 Building lime:

Part 1: 2001 Definitions, specifications and conformity criteria. Part 2: 2001 Test methods. Part 3: 2001 Conformity evaluation. BS EN 480 Admixtures for concrete, mortar and grout. Test methods.

BS EN 490: 2004 Concrete roofing tiles and fittings for roof covering and wall cladding.

BS EN 491: 2004 Concrete roofing tiles and fittings for roof covering and wall cladding.

BS EN 845 Specification for ancillary components for masonry:

Part 2: 2003 Lintels. BS EN 934 Admixtures for concrete, mortar and grout:

Part 1: 2006 Common requirements. Part 2: 2001 Concrete admixtures. Part 4: 2001 Admixtures for prestressing tendons. Part 6:2001 Sampling, conformity control and evaluation of conformity. BS EN 998 Specification of mortar for masonry: Part 1: 2003 Rendering and plastering mortar. Part 2: 2003 Masonry mortar. BS EN 1008: 2002 Mixing water for concrete. Specification for sampling, testing and assessing suitability.

BS EN 1992 Eurocode 2: Design of concrete structures:

Part 1.1:2004 General rules and rules for buildings. Part 1.2: 2004 Structural fire design. NA Part 1.2: 2004 UK National Annex to Eurocode 2. Design of concrete structures. BS EN 1994 Eurocode 4: Design of composite steel and concrete structures:

Part 1.1:2004 General rules and rules for buildings. Part 1.2: 2005 Structural fire design. BS EN 12350 Testing fresh concrete: Part 1: 2000 Sampling. Part 2: 2000 Slump test. Part 3: 2000 Vebe test. Part 4: 2000 Degree of compaction. Part 5: 2000 Flow table test.

Part 6: 2000 Density. Part 7: 2000 Pressure methods. BS EN 12390: 2000 Testing hardened concrete:

Part 1: 2000 Shape, dimensions for specimens and moulds.

Part 2: 2000 Making and curing specimens for strength tests.

Part 3:2002 Compressive strength of test specimens. Part 4: 2000 Specification for testing machines. Part 5: 2000 Flexural strength of test specimens. Part 6: 2000 Tensile splitting strength of test specimens.

Part 7: 2000 Density of hardened concrete.

Part 8: 2000 Depth of penetration of water under pressure.

BS EN 12504 Testing concrete in structures: Part 1: 2000 Cored specimens. Part 2: 2001 Non-destructive testing. Part 3: 2005 Determination of pull-out strength. Part 4: 2004 Determination of ultrasonic pulse velocity.

BS EN 12620: 2002 Aggregates for concrete.

BS EN 12696: 2000 Cathodic protection of steel in concrete.

BS EN 12794: 2005 Precast concrete products - foundation piles.

BS EN 12878: 2005 Pigments for the colouring of building materials based on cement and/or lime. BS EN 12794:2005 Precast concrete - foundation piles. BS EN 13055: Lightweight aggregates:

Part 1: 2002 Lightweight aggregates for concrete, mortar and grout. BS EN 13139: 2002 Aggregates for mortar. BS EN 13263: 2005 Silica fume for concrete. BS EN 13369: 2004 Common rules for precast concrete products.

BS EN 13501 Fire classification of construction products and building elements:

Part 1: 2002 Classification using test data from reaction to fire tests.

Part 2: 2003 Classification using data from fire resistance tests. BS EN 13747: 2005 Precast concrete products. BS EN 13813: 2002 Screed materials and floor screeds. Properties and requirements.

BS EN 14216: 2004 Cement - composition, specifications and conformity criteria for very low heat special cements.

BS EN 14487: 2005 Sprayed concrete. Definitions, specifications and conformity.

BS EN 14488: 2006 Testing sprayed concrete.

BS EN 14647: 2005 Calcium aluminate cement -composition, specification and conformity criteria. BS ISO 14656: 1999 Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete.

PD 6682 Aggregates:

Part 1: 2003 Aggregates for concrete - guidance on the use of BS EN 12620.

Part 3: 2003 Aggregates for mortar - guidance on the use ofBS EN 13139.

Part 4: 2003 Lightweight aggregates for concrete, mortar and grout - Guidance on the use of BS EN 13055-1.

Part 9: 2003 Guidance on the use of European test method standards.

0 0

Post a comment